On Thu, May 24, 2012 at 8:02 AM, <tidal-potomac-fly-rodders@googlegroups.com> wrote:
Group: http://groups.google.com/group/tidal-potomac-fly-rodders/topics
- 1950s fly fishing video [3 Updates]
- Tidal Potomac Visibilty [2 Updates]
- AE StraighEdge Angler information and sources [6 Updates]
- First fly fishing outing ever! [3 Updates]
- Bethany Beach [3 Updates]
"Eric Y." <theericyoung@gmail.com> May 23 12:55PM -0700
Mine also has an automatic reel... a red aluminum Pflueger. He also had an
old Morritt Intrepid Rimfly for it, which my mother currently uses on her
3-wt.
On Tuesday, May 22, 2012 4:57:57 PM UTC-4, Dave Marcus wrote:
Carl Zmola <carl.zmola0@gmail.com> May 23 08:28PM -0400
Eric,
I love that video. I had watched a few times before you posted it but I
always figured the rod was a Conolon. Since your post I did a little
research, Garcia didn't buy Conolon until 1960 so the rod could be a
True Temper. I also love the JW Young Beaudex reel (probably a Garcia
branded Beaudex). They are a poor man's Hardy.
I have quite a few vintage fiberglass rods and like to cast them. I
really like the Rimfly reels too, I have a couple of them and they often
find their way out to the pond. The nice thing about the Rimfly's is
the light, sturdy construction with an exposed palming rim. I have a
few automatic's too, but they seem to collect dust :-)
BTW, I love the tip bounce on the rod in that video. You can watch what
the tip bounce does to the line after the cast. Even a champion caster
got serious tip bounce with these rods.
Carl
On 05/23/2012 03:55 PM, Eric Y. wrote:
"Eric Y." <theericyoung@gmail.com> May 23 05:33PM -0700
I have an English made Cortland Rimfly that I keep double taper on for my
5wt, but it is not nearly as smooth as the Morritt Intrepid, despite being
nearly identical. Also, that rod really looks just like the True Temper,
markings at all... could be anything, but if I was a betting man...
On Wednesday, May 23, 2012 8:28:07 PM UTC-4, Carl wrote:
Mike Honcho <ariccobono@yahoo.com> May 23 11:44AM -0700
Hey everybody,
I hear that the river got really muddy last weekend. Anyone been out
this week? Has it cleared up?
Thanks!
"mike@shadfishing.com" <mike@shadfishing.com> May 23 03:29PM -0400
It's risen slightly and turned muddy this afternoon. A good gauge is the
last graph on this page
http://waterdata.usgs.gov/md/nwis/uv/?site_no=01646500
When the specific conductance value is lower the water is usually not as
clear.
scott <wswilber@verizon.net> May 23 06:24AM -0700
Any new reviews/comment on the Angler? I am 64, 6'4", 250, have two
titanium knees and would appreciate any counsel. Also, best local
sources? West, REI, other? Thanks!
Steve F <spfbeaver@gmail.com> May 23 07:44AM -0700
Scott,
A number of us have this model. I think it's pretty fantastic but I'm only
5'9", 170lbs so another owner might be able to speak in regards to size.
While my knees aren't titanium, I do have a bum knee and the flexibility of
the SOT type kayaks makes it much easier to move around to keep from
getting stiff. It's also great to kneel and cast from that I wouldn't
dream of doing from a hard kayak. It is extremely stable compared to most
hard kayaks so I would think the only limiting factor for a taller
gentleman such as yourself would be the leg room. The seat is fixed on
velcro to the floor of the kayak so it can be moved forward and back
around 6-8" or so. The event at Riverbend Park may be the ideal place to
have a seat in one and try it on for size.
As far as local sources, I contacted REI last week for a few spare parts
but they do not carry this particular model and suggested going straight to
AE. I haven't tried West Marine. Best of luck.
~ Steve
Howard A <howard_abramowitz@yahoo.com> May 23 08:16AM -0700
I purchased one about a month ago (thanks tax refund). I think after
Jeremy's post from his striper trip several of us went and got them, so
there will be a small armada of bright yellow inflatables out there.
I have only used it a few times, but so far I have enjoyed it. I think it
is as easy to get in and out of, tracks well and is easy to paddle. I got
a 230 cm paddle but think a 240 might be better given the wide beam. I am
6'2" and about 185 lbs, and it supports me and gear for and afternoon of
fishing without an issue. It may be a little short for someone 6'4", I have
adjusted the seat on mine towards the rear of its range. Inflating and
deflating are reasonably quick, I got the AE foot pump with the gauge which
is convenient for proper inflation.
I purchased it at west marine in alexandria, they price matched the listing
on amazon, but had some hesitation in doing so as I don't think it is their
policy to match amazon. It wasn't in stock so they ordered it, which took
a couple of days, but I didn't have to pay shipping, and west marine has a
rewards point program.
On Wednesday, May 23, 2012 9:24:49 AM UTC-4, scott wrote:
"scott wilber" <wswilber@verizon.net> May 23 01:50PM -0400
Steve,
Thank you so much. I do hope to attend the Riverbend event for this and
other good reasons.
Best,
Scott
_____
From: tidal-potomac-fly-rodders@googlegroups.com
[mailto:tidal-potomac-fly-rodders@googlegroups.com] On Behalf Of Steve F
Sent: Wednesday, May 23, 2012 10:45 AM
To: tidal-potomac-fly-rodders@googlegroups.com
Subject: {Tidal Potomac Fly Rodders} Re: AE StraighEdge Angler information
and sources
Scott,
A number of us have this model. I think it's pretty fantastic but I'm only
5'9", 170lbs so another owner might be able to speak in regards to size.
While my knees aren't titanium, I do have a bum knee and the flexibility of
the SOT type kayaks makes it much easier to move around to keep from getting
stiff. It's also great to kneel and cast from that I wouldn't dream of
doing from a hard kayak. It is extremely stable compared to most hard
kayaks so I would think the only limiting factor for a taller gentleman such
as yourself would be the leg room. The seat is fixed on velcro to the floor
of the kayak so it can be moved forward and back around 6-8" or so. The
event at Riverbend Park may be the ideal place to have a seat in one and try
it on for size.
As far as local sources, I contacted REI last week for a few spare parts but
they do not carry this particular model and suggested going straight to AE.
I haven't tried West Marine. Best of luck.
~ Steve
--
You received this message because you are subscribed to the Google Groups
"Tidal Potomac Fly Rodders" group.
To view this discussion on the web visit
https://groups.google.com/d/msg/tidal-potomac-fly-rodders/-/GljMB0ogm6wJ.
To post to this group, send email to
tidal-potomac-fly-rodders@googlegroups.com.
To unsubscribe from this group, send email to
tidal-potomac-fly-rodders+unsubscribe@googlegroups.com.
For more options, visit this group at
http://groups.google.com/group/tidal-potomac-fly-rodders?hl=en.
"scott wilber" <wswilber@verizon.net> May 23 01:51PM -0400
Howard,
Thank you for the information, I greatly appreciate it.
Best,
Scott
_____
From: tidal-potomac-fly-rodders@googlegroups.com
[mailto:tidal-potomac-fly-rodders@googlegroups.com] On Behalf Of Howard A
Sent: Wednesday, May 23, 2012 11:17 AM
To: tidal-potomac-fly-rodders@googlegroups.com
Subject: {Tidal Potomac Fly Rodders} Re: AE StraighEdge Angler information
and sources
I purchased one about a month ago (thanks tax refund). I think after
Jeremy's post from his striper trip several of us went and got them, so
there will be a small armada of bright yellow inflatables out there.
I have only used it a few times, but so far I have enjoyed it. I think it is
as easy to get in and out of, tracks well and is easy to paddle. I got a
230 cm paddle but think a 240 might be better given the wide beam. I am
6'2" and about 185 lbs, and it supports me and gear for and afternoon of
fishing without an issue. It may be a little short for someone 6'4", I have
adjusted the seat on mine towards the rear of its range. Inflating and
deflating are reasonably quick, I got the AE foot pump with the gauge which
is convenient for proper inflation.
I purchased it at west marine in alexandria, they price matched the listing
on amazon, but had some hesitation in doing so as I don't think it is their
policy to match amazon. It wasn't in stock so they ordered it, which took a
couple of days, but I didn't have to pay shipping, and west marine has a
rewards point program.
On Wednesday, May 23, 2012 9:24:49 AM UTC-4, scott wrote:
Any new reviews/comment on the Angler? I am 64, 6'4", 250, have two
titanium knees and would appreciate any counsel. Also, best local sources?
West, REI, other? Thanks!
--
You received this message because you are subscribed to the Google Groups
"Tidal Potomac Fly Rodders" group.
To view this discussion on the web visit
https://groups.google.com/d/msg/tidal-potomac-fly-rodders/-/imbkHH-2uUwJ.
To post to this group, send email to
tidal-potomac-fly-rodders@googlegroups.com.
To unsubscribe from this group, send email to
tidal-potomac-fly-rodders+unsubscribe@googlegroups.com.
For more options, visit this group at
http://groups.google.com/group/tidal-potomac-fly-rodders?hl=en.
Ernie <ernierojas@verizon.net> May 23 12:27PM -0700
Scott,
As well, I have two of those knees. I have 2 Ocean Kayak Prowlers and
they are super stable. I do not stand or kneel in them.
I will bring them to the PRSC event at Riverbend so you can check
them out.
Ernie
Aaron O <aaron@jorgeinc.com> May 23 05:36AM -0700
Mike,
Welcome to the group and congrats. Always happy to see new names on
the forum. Will see you around the forum and hopefully different events
throughout the year.
Aaron
On Wednesday, May 23, 2012 7:46:00 AM UTC-4, Mike Scully wrote:
namfos <mark.sofman@gmail.com> May 23 10:09AM -0700
LOL. Been there done that. Did that my first time astream for trout.
Tossed a 5 incher maybe 40 feet on a hook set that looked more like a
backcast. Setting the hook with fly gear is worth learning - and usually
the hard way. ;-)
On Wednesday, May 23, 2012 7:46:00 AM UTC-4, Mike Scully wrote:
Jeff Silvan <jeffreysilvan@gmail.com> May 23 10:20AM -0700
Congrats! My tip for setting the hook when you're expecting to get into
some smaller fish is to do the set with a pull of the line rather than a
jerk of the rod. A quick yank as if you're stripping in line is more than
enough for the small fish without sending them across the river. That
usually works fine even for the decent sized fish too, but you'll be able
to tell quickly if there's anything of significance on the other end and
you can supplement it with a lift of the rod.
On Wednesday, May 23, 2012 1:09:51 PM UTC-4, namfos wrote:
Zach on the Hill <zachary.r.hartman@gmail.com> May 23 05:54AM -0700
Hey gang,
I am going to be in Bethany Beach this weekend and was wondering if
anyone had any advice or intel on any opportunities while I am there?
Thanks and all the best -
Zach
Alek <alekchance@gmail.com> May 23 09:30AM -0700
there is a tidal outflow called the indian river inlet (i think) that has
easy access and a huge amount of water coming through. it is very deep and
fast so i would bring a fast sinking line. there are lots of flounder on
the bottom but you can get stripers and other fish too. it is at a public
beach so it will certainly be crowded.
On Wednesday, May 23, 2012 8:54:17 AM UTC-4, Zach on the Hill wrote:
Joe Molloy <josephmolloy@gmail.com> May 23 01:18PM -0400
I fished near Fenwick Island this time last year. I just walked the beach
at sunrise and fished every spot I saw a rip current (like every 75 feet).
Used my fastest sink tip and a clouser minnow. The water was not deep but i
wanted to get the fly down quick before the incoming waves blew my line all
over the place.
I only managed one striped bass but had numerous hits once I started to
figure out how to cast/strip in the surf a little better.
Also, the water was mighty chilly. I only waded out up to my calves while
barefoot but would have loved some boot foot waders.
joe
You received this message because you are subscribed to the Google Group tidal-potomac-fly-rodders.
--
You can post via email.
To unsubscribe from this group, send an empty message.
For more options, visit this group.
You received this message because you are subscribed to the Google Groups "Tidal Potomac Fly Rodders" group.
To post to this group, send email to tidal-potomac-fly-rodders@googlegroups.com.
To unsubscribe from this group, send email to tidal-potomac-fly-rodders+unsubscribe@googlegroups.com.
For more options, visit this group at http://groups.google.com/group/tidal-potomac-fly-rodders?hl=en.
--
Jim Greene. President and CEO
Waterwisp Flies <www.waterwisp.com>
--
You received this message because you are subscribed to the Google Groups "Tidal Potomac Fly Rodders" group.
To post to this group, send email to tidal-potomac-fly-rodders@googlegroups.com.
To unsubscribe from this group, send email to tidal-potomac-fly-rodders+unsubscribe@googlegroups.com.
For more options, visit this group at http://groups.google.com/group/tidal-potomac-fly-rodders?hl=en.
0 comments:
Post a Comment