Re: {Tidal Potomac Fly Rodders} Guide spacing

I have source code in Python that matches these pages.  The one I prefer is the Art Scheck formula as described here.

http://stevenojai.tripod.com/rod_guide.htm

It is the same formula used in Carlin's guide calculator with some rounding errors.

As a reference, These are a good start, but after you tape your guides on a static test is worth it.

from the other Carl with a slavic name.

Carl

--

Carl Zmola

On Fri, Feb 12, 2016 at 8:49 AM, Carl Smolka <carl.smolka@verizon.net> wrote:

For those of you building your own rods, the calculator referenced below will give you a couple of options for spacing your guides.

Tight lines,

Carl Smolka

 

From: Chris Carlin [mailto:maker@farnorthrodsmiths.com]
Sent: Thursday, February 11, 2016 1:44 PM
To: Carl Smolka <carl.smolka@verizon.net>
Subject: Re: guide spacing

 

Hi Carl,

You can download the Windows install file here:

www.carlinbamboo.com/programs/GuideCalculator.msi

Or, we ported the program into a website a few years back (with the improvement of using the Cattanach method as well as the Clemens) so you can also run it from a web browser if you'd prefer:

http://guidecalculator.cutthroattraders.com/#/

Hope that helps!

Cheers,

Chris

 

--
http://www.tpfr.org
---
You received this message because you are subscribed to the Google Groups "Tidal Potomac Fly Rodders" group.
To unsubscribe from this group and stop receiving emails from it, send an email to tidal-potomac-fly-rodders+unsubscribe@googlegroups.com.
To post to this group, send email to tidal-potomac-fly-rodders@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/tidal-potomac-fly-rodders/000001d1659c%2434737360%249d5a5a20%24%40verizon.net.
For more options, visit https://groups.google.com/d/optout.

--
http://www.tpfr.org
---
You received this message because you are subscribed to the Google Groups "Tidal Potomac Fly Rodders" group.
To unsubscribe from this group and stop receiving emails from it, send an email to tidal-potomac-fly-rodders+unsubscribe@googlegroups.com.
To post to this group, send email to tidal-potomac-fly-rodders@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/tidal-potomac-fly-rodders/CAK8gq%2BEnzpP0wnfveT2sSa8aOEeLPws%3D_DPnGQr0yZFyQTsq2A%40mail.gmail.com.
For more options, visit https://groups.google.com/d/optout.