I've done this with some old lines as well and as the others have said, it will work just fine. On intermediates, I usually use 0X fluoro for the trap nail knots rather than Gel Spun as seen in the video. This keeps the loops nice and clear like the rest of the line, assuming it is a clear intermediate.
Also, pay attention to which part of the line you are harvesting from. The belly section will be pretty fat which may make for some thicker than desired loops. The running line will be nice and thin, but may be a bit light, lacking turnover when casting heavier flies If you get a section from the back part of the rear taper transitioning to the running line, you'll get a mildly tapered sink tip that will roll out nicely.
Have fun tinkering!
Dan Davala
On Friday, September 18, 2015 at 10:17:43 AM UTC-4, tperkins wrote:
I've done it, seems to work fine. I made a couple of different lengths and tied loops into both ends so I can switch them out quickly. Here is a video of Dan (taken by Rob) using the nail knot to make the loops. https://www.youtube.com/watch?v=qtZavqTeG4Y
On Friday, September 18, 2015 at 10:08:46 AM UTC-4, Josh Cohn wrote:I recently shredded a fairly new intermediate line on some oysters ( down here in charleston) and was thinking of experimenting with cutting lengths to make interchangable sink tips sort of like Rio's T system that i could use with my floating lines. Anyone have any experience with something like this? Opinions or advice appreciated thanks guys
http://www.tpfr.org
---
You received this message because you are subscribed to the Google Groups "Tidal Potomac Fly Rodders" group.
To unsubscribe from this group and stop receiving emails from it, send an email to tidal-potomac-fly-rodders+unsubscribe@googlegroups.com.
To post to this group, send email to tidal-potomac-fly-rodders@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/tidal-potomac-fly-rodders/69432e84-bdb8-46cd-9bf7-e5863abf75a3%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
0 comments:
Post a Comment